RIDGID RSM3300 Bedienerhandbuch PDF herunterladen (Seite 11)

OPERATING INSTRUCTIONS

1. To test the back-up pump, unplug the main pump and

transformer and fill sump with water until the water lifts the

bottom float therefore activating the back-up pump. Repeat

this process two times to be sure pump is operating

normally.

2. If pump operates normally, plug the transformer into wall

outlet and plug the main pump back in. Verify the main

pump is operational by repeating step 1 above.

FCC STATEMENT

This equipment complies with Part 68 of the FCC rules and

the requirements adopted by the ACTA (American Council

for Terminal Attachments). On the inside cover of your unit

is a label that contains, among other information, the FCC

registration number for this product. If requested, this number

The advanced notification system produces auto-dialer alerts

and can also notify your 3rd party home security system

provider (if available). A qualified home security technician is

required when making connections between the two systems.

An access port is available on the back of the lid in which

the qualified technician can properly connect the advanced

notification system to the security system. (See Figure 5)

At this time, you may wish to change the system settings.

Since both the auto-dialer and security system cannot access

the phone line at the same time, you must choose which

system the software accesses ﬁrst. If you wish the security

system to have ﬁrst priority, on the main menu, scroll to and

select the "SECURITY SETUP" option, select "Security has

Priority" and hit "Enter" to conﬁrm. The factory default setting

is "Back-up has Priority".

If you choose, you can test the security notiﬁcation by

simulating any of the security notiﬁcation alerts. (See Figure 6)

Replace the inner shield once all connections and tests have

been validated.

SECURITY SYSTEM INSTALLATION AND SETUP

Electric shock hazard.

Disconnect

power before servicing. Apply a ﬁxed

lock or tag to prevent unexpected application of power.

Figure 5 - Security system setup

DO NOT overtighten screw.

must be provided to the telephone company.

PLUG AND JACK USE

A plug and jack used to connect this equipment to the premises

wiring and telephone network must comply with the applicable

FCC Part 68 rules and requirements adopted by the ACTA.

A compliant modular plug is provided with this product. It is

designed to be connected to a compatible modular jack that is

also compliant. See installation instructions for details.

RING EQUIVALENCE NUMBER (REN)

The REN is used to determine the number of devices that may be

connected to a telephone line. Excessive REN’s on a telephone line

may result in the devices not ringing in response to an incoming

call. In most, but not all areas, the sum of RENs should not exceed

ﬁve (5.0). To be certain of the number of devices that may be

connected to a line, as determined by the total REN’s, contact your

local telephone company. The REN for this product is listed on the

inside of the controller lid with the FCC identiﬁer.

TELEPHONE NETWORK INTERFERENCES

If this System causes harm to the telephone network, the

telephone company will notify you in advance that temporary

discontinuance of service may be required. But if advance notice

isn’t practical, the telephone company will notify the customer

as soon as possible. Also, you will be advised of your right to

ﬁle a complaint with the FCC if you believe it is necessary. The

telephone company may make changes in its facilities, equipment,

operations or procedures that could affect the operation of the

equipment. If this happens, the telephone company will provide

advance notice in order for you to make necessary modiﬁcations

to maintain uninterrupted service. If the equipment is causing harm

to the telephone network, the telephone company may request

that you disconnect the equipment until the problem is resolved.

If your home has specially wired alarm equipment connected to

the telephone line ensure the installation of your System does not

disable your alarm equipment. If you have questions about what

will disable alarm equipment, consult your telephone company or a

qualiﬁed installer.

ADVANCED NOTIFICATION

MESSAGE ON UNIT SCREEN

PRIMARY PUMP STATUS

AC Power Interrupted

Primary Pump Suspect

BACK-UP DC PUMP STATUS

DC Pump In Operation

DC Pump Not Operable (Failed Test)

Check Floats For Debris

Capacity Overflow Possible

DC Impeller Locked

BATTERY TRANSFORMER

Transformer Bad

Blown Controller Fuse

MICROPROCESSOR CONTROLLER

CONDITION

12 V BATTERY STATUS

DC Pump Under Test

Battery Fully Charged

Battery 80% Charged

Battery 60% Charged

Battery 40% Charged

Battery 20% Charged

Battery Dead

Battery Condition Questionable

CALL PHONE

AUDIBLE ALARM

SECURITY SYSTEM

Reverse Polarity

Figure 6 -Notiﬁcation alerts chart

The inner shield will have to be removed during

this step. Be sure not to damage any

components on the control board

FOR SIGNAL

USAGE ONLY. NC/NO Output:

12 Volt DC, 2 amp max.

2. The extension cord must have a ground wire and plug pin

and be connected to a properly functioning GFCI

receptacle.

3. Make sure the connection between the transformer and

extension cord are elevated off the floor.

Ridge Tool Company

Model RSM3300 – Operating Instructions and Parts Manual

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare

RIDGID RSM3300 Bedienerhandbuch Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein RIDGID RSM3300