RIDGID Auto-Clean K-30 Betreibershandbuch PDF herunterladen (Seite 6)

Auto-Clean™ Drain Cleaning Machine

chine is standing in water. Operating machine while

in water increases the risk of electrical shock.

• Only use drain cleaner to clean drains of recom-

mended sizes according to these instructions.

Other uses or modifying the drain cleaning machine for

other applications may increase the risk of injury.

Description and Specifications

Description

The RIDGID

Auto-Clean Drain Cleaning machine is de-

signed to clean

" to 1

" drain lines in sinks, tubs and

showers. The Auto-Clean drain cleaner is supplied with an

air foot pedal for ON/OFF control of the motor and features

a 2-way AUTOFEED

unit, which automatically advances

and retrieves the cable. The AUTOFEED allows the cable

to be directly fed into the drain which minimizes mess

and helps to protect fixtures.

The Auto-Clean drain cleaner is not recommended for

use with toilets.

Specifications

Motor Type...................Universal

Machine Rating............ Double Insulated

120VAC single phase

1.1 amp, 60Hz

120V

1,1 A, 60Hz

Power Switch...............ON/OFF/Momentary Reverse

Operating Speed..........450 RPM

Drain Line Capacity.....

" – 1

Weight .............................11 lbs.

Cable................................

" x 30' MAXCORE™ 50

Catalogue No. 34893

The Auto-Clean drain cleaner is protected under various

U.S. and International patents and applications, including

6,412,136, 7,478,451, D509,929 and D570,558.

This machine is made to clean drains. If prop-

erly used it will not damage a drain that is in good condition

and properly designed, constructed and maintained. If

the drain is in poor condition, or has not been properly de-

signed, constructed and maintained, the drain cleaning

process may not be effective or could cause damage to the

drain. The best way to determine the condition of a drain

before cleaning is through visual inspection with a camera.

Improper use of this drain cleaner can damage the drain

cleaner and the drain. This machine may not clear all

blockages.

are plugged into a Ground Fault Circuit Interrupter

(GFCI) found in circuit boxes or outlet recepta-

cles. The GFCI on the machine power cord will not

prevent electrical shock from the extension cords.

• Keep all electric connections dry and off the

ground. Do not touch plugs or tool with wet hands.

Reduces the risk of electrical shock.

• Wear leather work gloves. Never grasp the rotating

cable with anything else, including cloth gloves or

a rag. They can become wrapped around the cable,

causing hand injuries. Only wear latex or rubber gloves

under

leather work gloves. Do not use damaged gloves.

• Do not allow the end of cable to stop turning while

the machine is running. This can overstress the

cable and may cause twisting, kinking or breaking of

the cable.

• Position machine so that the AUTOFEED is within

6" (15 cm) of the drain inlet or properly support ex-

posed cable when the distance exceeds 6" (15

cm). Greater distances can cause control problems

leading to twisting, kinking or breaking of the cable.

• One person must control both the cable and the

foot switch. If the cutter stops rotating, the operator

must be able to turn the machine motor off to prevent

twisting, kinking and breaking of the cable.

• Do not operate the machine in REV (reverse) rota-

tion except as described in this manual. Operating

in reverse can result in cable damage and is used to

back the tool out of blockages.

• Do not wear loose clothing or jewelry. Keep your

hair and clothing away from moving parts. Loose

clothing, jewelry or hair can be caught in moving parts.

• Always use appropriate personal protective equip-

ment while handling and using drain cleaning

equipment. Drains may contain chemicals, bacteria and

other substances that may be toxic, infectious, cause

burns or other issues. Appropriate personal protective

equipment always includes safety glasses and

leather work gloves in good condition, and may in-

clude equipment such as latex or rubber gloves, face

shields, goggles, protective clothing, respirators and

steel toed footwear.

• Practice good hygiene. Use hot, soapy water to

wash hands and other body parts exposed to drain

contents after handling or using drain cleaning equip-

ment. Do not eat or smoke while operating or handling

drain cleaning equipment. This will help prevent con-

tamination with toxic or infectious material.

• Do not operate this machine if operator or ma-

NOTICE

1 2 3 4 5 6 7 8 9 10 11 ... 14 15

Kommentare zu diesen Handbüchern

Keine Kommentare

RIDGID Auto-Clean K-30 Betreibershandbuch Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hochdruckreiniger RIDGID Auto-Clean K-30