RIDGID ZRR350RHE Gebrauchs- und Pflegehandbuch PDF herunterladen (Seite 4)

4 – English

Know your pneumatic tool. Read operator’s manual

carefully. Learn its applications and limitations, as well

as the specific potential hazards related to this tool. Fol-

lowing this rule will reduce the risk of electric shock, fire,

or serious injury.

Always wear safety glasses with side shields. Everyday

glasses have only impact resistant lenses. They are NOT

safety glasses. Following this rule will reduce the risk of

eye injury.

Protect your lungs. Wear a face or dust mask if the op-

eration is dusty. Following this rule will reduce the risk of

serious personal injury.

Protect your hearing. Wear hearing protection during

extended periods of operation. Following this rule will

reduce the risk of serious personal injury.

Make sure the hose is free of obstructions or snags.

Entangled or snarled hoses can cause loss of balance or

footing and may become damaged.

Use the tool only for its intended use. Do not discharge

fasteners into open air.

Use the pneumatic tool only for the purpose for which

it was designed.

Do not use hardened nails in this tool.

Use only the fasteners recommended for this tool.

Use of the wrong fasteners could result in poor fastener

feeding, jammed fasteners, and nails leaving the tool at

erratic angles. If fasteners are not feeding smoothly and

properly, discontinue their use immediately. Jammed

and improperly feeding fasteners could result in serious

personal injury.

Never use this tool in a manner that could cause a

fastener to be directed toward anything other than

the workpiece.

Do not use the tool as a hammer.

Always carry the tool by the handle. Never carry the

tool by the air hose.

Do not alter or modify this tool from the original design

or function without approval from the manufacturer.

Always be aware that misuse and improper handling

of this tool can cause injury to yourself and others.

Never clamp or tape the trigger or workpiece contact

in an actuated position.

Never leave a tool unattended with the air hose at-

tached.

Do not operate this tool if it does not contain a legible

warning label.

Do not continue to use a tool that leaks air or does

not function properly.

SPECIFIC SAFETY RULES

OPERATION

Always assume that the tool contains fasteners.

Do not carry the tool from place to place holding the

trigger. Accidental discharge could result.

Always handle the tool with care:

 Respect the tool as a working implement.

 

 

the work.

 

operation as accidental actuation may occur, possibly

causing injury.

Choice of triggering method is important. Check

manual for triggering options.

Pneumatic tools are designed for single-hand use. Do

not hold the tool by the front of the magazine. Do not put

hands, head, or other parts of your body near the bottom

of the magazine where the nail exits the tool, as serious

personal injury could result.

Do not point the tool toward yourself or anyone

whether it contains fasteners or not.

Do not actuate the tool unless you intend to drive a

fastener into the workpiece.

Always ensure that the workpiece contact is fully posi-

tioned above the workpiece. Positioning the workpiece

contact only partially above the workpiece could cause

the fastener to miss the workpiece completely and result

in serious personal injury.

Do not drive fasteners near edge of material. The

workpiece may split causing the fastener to ricochet,

injuring you or a co-worker. Be aware that the nail may

follow the grain of the wood, causing it to protrude un-

expectedly from the side of the work material.

Keep hands and body parts clear of immediate work

area. Hold workpiece with clamps when necessary to

keep hands and body out of potential harm. Be sure the

workpiece is properly secured before pressing the nailer

against the material. The workpiece contact may cause

the work material to shift unexpectedly.

Keep face and body parts away from back of the tool

cap when working in restricted areas. Sudden recoil

can result in impact to the body, especially when nailing

into hard or dense material.

1 2 3 4 5 6 7 8 9 ... 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare

RIDGID ZRR350RHE Gebrauchs- und Pflegehandbuch Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nagelpistole RIDGID ZRR350RHE